![]() |
|
| Cues - Pool Cues - Billiard Cues - Break Cues - Jump Cues - Discount Prices - Call Us at 888-809-7665 |
|
Click Here for Predator Index |
WARRANTY INFORMATION
As the manufacturer of the highest quality billiards products on the market today, Predator Products is committed to performance and durability of our products.
To protect your investment, Predator Products offers a limited lifetime warranty against manufacturing defects. If you ever experience a problem that you believe is covered under warranty, please call our customer service department at 1-888-314-4111 or 1-904-448-8748 for international callers. Please note that this warranty does not cover problems resulting from warping or abuse.
Care Instructions
WARPAGE - FINISH: Wood will soak up moisture in wet climates and release moisture in dry climates. To prevent warpage or finish problems, your cue should be stored under consistent temperature and moisture conditions.
ABUSE: Cues made of wood are not designed to withstand lateral pressure. Situations where a cue is leaning against a wall, dropped on the floor, bent while playing or hitting a table can damage the cue. We recommend protecting your cue with a hard case.
TIP DIAMETER: We do not recommend turning your shaft but if you do, do not turn it below 12.25 mm for a 314 shaft, or below 11.40 mm for a Z shaft, or the warranty will be voided.
SHAFT MAINTENANCE: To clean a Predator shaft, use a towel slightly dampened with rubbing alcohol. To avoid damaging your Predator shaft do not sand it, no abrasive is necessary. Use a leather burnisher or similar material to seal the shaft after cleaning. Do not expose the shaft to excessive moisture and do not steam it to remove dings.
UNI-LOC® JOINT: We recommend cleaning the Uni-Loc® Joint when
you first receive your cue and every six months thereafter. These joints are
precision manufactured to exact tolerances and even a modest amount of dirt can
create a problem. We suggest using a Q-Tip dipped in Isopropyl alcohol to clean
the inside threads and bore of the insert in the shaft. Use a clean rag and
alcohol to clean the joint pin and threads as well. We recommend the use of
joint protectors as they will help to keep your joint clean, and protect it from
being damaged.
FERRULE: Much of the shaft’s performance can be attributed to our ferrule design
and composition. Due to the
performance enhancing material used for the ferrule, scratches may appear with
use. In this case, we recommend sending your shaft to us or to an authorized
Predator repair center for a clean up. Do not remove or change the ferrule or
the warranty will be voided. If you are having work done on your shaft, please
note that the Predator ferrule has a low melting point and if overheated, it
will melt.
TIP: If tip replacement is needed, we recommend a tip that is medium-hard, we are currently using Le Pros. For best results, we recommend that you send it to us or have an authorized Predator repair center do it on a lathe.
WRAP CLEANING: Use a very slightly damp towel to wipe off the Ultra-Leather® wraps and dry immediately (do not use any solvents), use Isopropyl alcohol for Irish Linen wraps.
PREDATOR CUSTOMER SERVICE: If you have any questions or need any maintenance work done on your Predator product, use our Contact Us form or call customer service at 1-888-314-4111 or at 1-904-448-8748 for international callers, or e-mail us at customerservice@predatorcues.com
Click Here for Predator Index
Predator
Technology |
C4 Technology
|
Warranty & Cue Care |
Uni-Loc
| PROS
|
Joint Styles
|
Tech Tips |
Playing Tips
| Home | Pool Cues | Custom Cues | Cue Cases | Accessories | Billiard Lighting | Game Room Furniture | Sport Logo |
| World's Best Selection of Pool Cues and Game Room Supplies and Pool Table Lights |
|
View
Cart
|
Shipping
|
Try a Cue
Guarantee
| Pool Cue
Specials
| Case
Specials |
Pool Table Lights |
Email |
||